Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello allI configure on an ASR a controll plane policing and althoug i have a match-all class, I can see packets conforming to class-default . My question is how can I identify which kind of traffic is conformed by class-default? Also I notice tha...
Hello AllIs their a way to remove the first AS number (not private) from an ASpath? For example we are receiving a route with AS PATH 123 456 457 458 and we want to remove the 123 AS and put in the BGP table the route with AS 456 457 458 ?The reas...
HelloI have 3 STM-1 equal cost links between two GSR12000 within my MPLS core. My problem is that load balancing/sharing of traffic passing via this links is done ONLY in one way and not both ways. OSPF is running as an IGP protocol.Can you please ad...
Hello allRunning show mls statistic on a Cisco 7609 I get the follwing output form one of the modulesErrors MAC/IP length inconsistencies : 18 Short IP packets received : 0 IP header checksum errors : 35 TTLfailure...
Hello all We have a few Cisco7304 we are having problems with unstable ospf. We are having two of them in a an enviroment where we have several C7401 , C7609 and C7513. The ospf of 7340 whith the other routers is very untable while the OPSF between ...
This actually what we are doing at the moment. But this means that for every customer routes we have to crate a less specific prefixes and it is a problem. The other thing is to create L2 xconnects directly to the ISP via the MPLS service provider ...
Well it seems that PXF is working. CPU goes up to 90%. I did not figure out which proccess is responsible for the HIGH CPU. Changing IOS , helps reducing CPU to 45% with the same users and same throughput, but we are facing some problems with ACLs. W...
I have A c7400 with an ATM interfaces with many VCs to users. Users are assinged private IPs and in order to get to the internet they are dynamicaly assigned public IPs. On the ATM interface I have nat inside and nat outside on the gigabit of the C74...
