have a DSL broadband connection using PPPoE encapsulation and use a netgear router cabled from the Netgear WAN port to the Ethernet port of the cable modem to handle the authentication to my ISP. Would it be possible with any of the IOS versions to ...

Have a 2611 with 1 serial and 2 Enet ports that I would like to run to my ADSL broadband modem using PPPoE. My question is, will this require an ADSL WIC or can I let the IOS just handle the authentication and routing? Broadband modem is in bridge mo...

Probably an easy one for you guys.I want to deny telnet access to my router interface (MC3810) facing the internet. I've tried setting access lists but it doesn't work. My internal addressing is 10.4.0.0. Here is what I've done so far.access-list 100...

I have an MC3810. Hardware is as follows:*2 serial ports*1 T1/E1 MFT*1 T1/E1 DVM* Ethernet Port 0 (LAN)I want to use the T1/E1 MFT (WIC) contoller with the built-in CSU for our frame relay connection and not the serial ports. I have setup the control...

Is it possible to have 2 or more VLAN's simultaneously on a Catalyst 2924 XL switch? I have setup a second VLAN via the vlan database and set the state to active. Howerver, the subinterface is always administratively shutdown. I've tried to set the s...