Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible to use the Auto-Login (aka Skip PIN from a Known Extension) feature from a System Call Handler Menu choice?I'm trying to have a Menu Option choice (caller input 3) that will send caller to the Sign-In dialog - and have the Sign-in dial...
I thought I had a pretty simple config on my CSS11501- but have run into an issue I'm having trouble resolving.I have two unix webservers (IPs are .99 and .100) on ports e1 and e2, and my uplink for the CSS is on port e8.The CSS has a VIP address (.1...
Is there any way to globally, or even better on a conference by conference basis, disable the participant entry and exit tones in Cisco Conference Connection 1.2(2)SR1 ?Or can someone tell me the name and location of the specific Wav files for these ...
We have our 'Tone on Hold Setting' in CCM 3.3(4) set to Zero seconds. For internal calls between IP phones there is one set of on-hold beeps when call is placed on hold. Calls that come in over PSTN on IOS H.323 gateways (on 7200 routers) - get tone ...
When using the Cisco TSP, is there any way to see all the redirections a single call has taken? Currently I can only see original called number, and the final redirection. (example - If a call goes from ext 1111, to 1112, then ends at 1113 - is there...
Think I found out how to disable them globally here:http://cisco.com/en/US/products/sw/voicesw/ps752/products_tech_note09186a008017b796.shtmlanyone know if there's anyway to make this a conference by conference parameter?
Have you defined your PSTN gateway as an IOS Media Resource - Conference Bridge in CCM? Have you added the 'dspfarm' subcommand to your voice card config, and also configured the gateway with the 'dspfarm confbridge maximum sessions' command, etc? If...
My understanding is that the MGCP gateways get the Name Delivery in the Facilities IE of Q.931, and the H.323 gateways only look in the Display IE (and they may also only do that when set up as an inter-cluster trunk)
By any chance are you using a hardware conference bridge? We had a very similar issue where conferences were dropping at exactly the 10 minute mark - but it was happening only to users utilizing conference resources on one of our 2651 routers configu...
