Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I think I already have the best book "Deploying and Troubleshooting Cisco Wireless LAN Controllers 2009" but that talks about WCS, ACS and AirOS only. Old platforms.
Is there a new one published which make use of Prime Infrastructure, MSE, ISE, 3850s...
Hi Guys,I have two 5548s as core. 8 FEXs are multihomed (advanced vPC topology?) to both the cores.Suppose, I have to configure a bunch of ports on the FEXs, say Eth101/1/10 - 20. I would login to the first core and apply the configs.My question is -...
Hi,Scenario:My topology diagram is attached. Please note the following:Branch_1 & Branch_2 have Three connections:MPLS/BGP Link to Head Office.ISDN to repective Regional Offices. Running OSPF. Regional Office is an ABR. Branch's ISDN are in area 1 an...
My organization had links to remote branches through one ISP. For redundancy we are going for a second ISP at remote branches. This will be a backup connection.The thing is that - I don't want to complicate branch end BGP configuration by putting ...
Have you checked under Security > AP Policies? Try with only MIC checked.
Or you can add the mac-address of AP under Security > Mac filtering > add mac of AP as shown in your previous screenshot.
Thanks Freerk, I am already rummaging through the Cisco Live presentations. Thanks for pointing out some of the good ones! I have a lab available for 5 days to practise all of this stuff
Cheers!
I will keep an eye out on for when a good book will b...
Option #5: Put a new router between HO/DC Core Router to act as an ABR. Now put all the VSAT GREs in a new Area 500. Make it a NSSA or originate default route or something clever. However, problem would be getting a new router with enough power, the ...
