02-17-2013 01:00 AM - edited 03-07-2019 11:45 AM
Hi Guys,
I have two 5548s as core. 8 FEXs are multihomed (advanced vPC topology?) to both the cores.
Suppose, I have to configure a bunch of ports on the FEXs, say Eth101/1/10 - 20. I would login to the first core and apply the configs.
My question is - do I have to do the same on the second core also? Or would the first core replicate the stuff to the second core? I know about port-profiles/CFS and such. But, without that would it automatically sync to second core?
For testing purpose, I went to Core 1 Eth101/1/10 and put a description "TEST". Wrote the config. After 5 minutes logged into second core and did show run Eth101/1/10. But, the description "TEST" didn't show up there.
Also, doing sh run on any FEX port is faster on one of the cores and very slow on second core... all the FEXs have 20 GB uplink to core 1 & 2 (so total 40GB in vPC, max pinning 1)
How do you guys do this sort of stuff on the Nexus?
02-17-2013 04:25 AM
Yes, U have to do the same configuration from both the core, then only it will work correctly.
02-18-2013 12:06 PM
Thanks for the answer Subhasis. Can you please point me to some sort of documentation or article where it talks about Management/Operations on 5K+2K?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide