Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone,
We have a Cisco 4431 router and need your help with the SFP modules - for some reason all four remain down know matter how we configure them, if we plug a copper CAT5 e cable into the port marked GI0/0/0 that interface comes online. W...
Hello everyone.
Need some help with a request we received this morning for adding a new site to site Ipsec VPN.
The company connecting to our network has requested two public IP's from us for making the VPN connection, I was lead to believe all VPN's...
Hello Everyone,We have a weird problem that we can't figure out on our own and need your expertise.We have dozens of people reporting a network outage at our branch office, after arriving onsite we see everyone down, they use our Cisco 3750 /48 port ...
We currently have customer A connecting to our Company through site-to-site VPN to Server1 10.10.2.165, through a third party vendor who handles the VPN connection on their side, we have another Company B looking to do the same thing using the same t...
Hello everyone,Need some help launching ASDM on Win7, Win8 computers, having problems with the Java not loading for each ASA we have.We have IOS version 8.4/5 ASDM 711 on most and IOS version 9 ASDM 721 on othersWhen trying to access the ASDM logon p...
I'm not sure what this is network-object 192.168.127.54 255.255.255.255 that IP
This is what we have in the config right now
object-group network public_for_nat description mapped address for SC_NCR_Server 10.10.2.165 network-object 208.251.158.165 ...
I'm sorry Richard my bad, I was showing what we had so far in the config.
I'm using this
nat (inside,outside) source static our_private_address public_for_nat destination static remote_cust_network remote_cust_network no-proxy-arp route-lookup
error...
I changed the IP's for the lab but everything else the same as shown below
object-group network public_for_nat description mapped address for SC_NCR_Server 10.10.2.165 network-object 208.251.158.165 255.255.255.255object-group network our_private_add...
Hi Richard,
I need additional help with the NAT information you provided, i'm not sure what to use and the ASA will not take what we currently have posted above
nat (inside,outside) source static our_private_address public_for_nat destination static ...