Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So I have been racking my brain with OSPF for the past couple months and have had a minor setback in dealing with the Forwarding Address value in the LSA Type-5s and Type-7s. Certain conditions must be met on the router that is generating the LSA Ty...
R6 - R7 via Serial link. R6 is installing updates from R7 in its R.T. R7 is receiving updates from R6 but not installing the routes in the RIP database or R.T. Any ideas what might be wrong? R6: version 1 timers basic 30 180 0 240 passive-interfa...
So I am studying EIGRP, and I am missing a fundamental concept of EIGRP. I have read several documentations, Routing TCP/IP Volume I, CCNP Route, etc and have still not seen a simple answer.Scenario 1: LAN1 - R1 - R2 - LAN2So, a cable between LAN1 ...
Hey Cisco Support Community,I have about 60 different configurations I need to upload to 6 different routers/switches. All of the files begin with "config", so I was hoping I could use the asterisk to grab all the files at once, so I don't need to u...
Hey all,I just got my 3550 delivered today and finished uploading the latest image.I had a couple of complications with the install that might have generated this new issue. When I transferred the image via XModem, I changed the baud rate to 57600 ...
Haven't tried it yet. I ordered an ASA5505 yesterday and hope to use DynDNS for it. If not, I'll have to place a home router, or an 1841 in front of it to get it to work. I'll update this page if it works or not.
This taught me some extra stuff about the Type-7 to Type-5 translation; however, I am still lost w/ the forwarding address within the NSSA. For instance, a router within the NSSA area which is not an ASBR or ABR appears to only see the Type-7 addres...
Darnit! Found I was deny anything learned by R6. I didn't post the filtering, because I thought there wasn't an issue with it An hour of tshooting "down the drain"...guess I learned a lot more than I thought though...lol. Answer:R7:router rip di...
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094e8d.shtmlBased on the documentation's example, an unnumbered interface can reference an IP address that is on a different subnet, yet still communicate between an adjacent...
First, on this website you'll see lots of bias towards Cisco brand. A CCIE consultant I know recommends product ranges from Netgear and up.But, some of the best budget Cisco routers w/ VPN and multiple NAT translating abilities are the Cisco 800 ser...
