Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am planning on using a number of these IP phones at users homes, from where they can connect over the VPN client built into the phone to the ASA 5520, then once connected to the network, they can be configured to work with Asterisk.I have attain...
Hi,I am planning on using a number of these IP phones at users homes, from where they can connect over the VPN client built into the phone to the ASA 5520, then once connected to the network, they can be configured to work with Asterisk.I have attain...
Hi, I am planning on using a number of these IP phones at users homes, from where they can connect over the VPN client built into the phone to the ASA 5520, then once connected to the network, they can be configured to work with Asterisk.I have attai...
Hello,We are wanting to get some Cisco IP Phones (namely the Cisco SPA525G2) at some of our workers homes, which would connect via VPN to our central office which has an ASA 5510. Within our network we have asterisk setup, and some other brand softsw...
We have a few remote users who want IP phones setup at their homes, which can then use the internal phone system (on Asterisk). These users currently connect to the private network over Remote Access IPSec VPN, through an ASA 5510. My question is wha...
Hi Paolo,I know that that you can use the Cisco SPA5xxx with Asterisk, as it describes the process in this official Cisco document;http://www.scribd.com/doc/122825506/SPA5xx-Asterisk-ZeroTouch-04202010-II-1.If Asterisk is supported as It looks like, ...
Hi Herbert,Thanks! Currently I have users conecting to IPSec remote access VPN, which there are 250 seats available for. If I were to install L-ASA-SSL-10. which would give me 10 premium anyconnect licenses, would this have any effect on the seats I ...
Hi, actually think ive found my own answer. This official Cisco document "Configuring Cisco SPA5xx IP Phones in an Asterisk® Environment" explains how this is donehttp://ftp.shlink.de/manuals/SPA5xx_Asterisk-web-UI_101909.pdf"By the end of this docum...
Hi Ronak,Thanks, what exactly does this mean? That it will work but its just not supported by TAC / support, or does it simply not work at all? A Cisco IP phone cannot be used with Asterisk / other open source softswitches/PBX's?
Hi etamminga, Thanks - reading that there is a part;Note: A "Premium" license and an "AnyConnect for Cisco VPN Phone" license is required.The ASA 5510 output shows;"AnyConnect for Linksys phone : Disabled" Instead of the "AnyConnect for Cisco VPN pho...
