Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a site with Call Manager 5.1.2 and ARC Enterprise 4.1.0.348(SR2) We have a problem with ARC believing that extensions are "unavailable" when the extensions are infact available and in regular use.I have checked that CTI is enabled for the exte...
I am trying to understand why calls are failing to mobile UK 075xx numbers on a Call Manager system.I have a Route Filter named "RF_Mobile" and there were two entries in there for 07 series numbers. One Clause had a specific match for ==75xx and I ha...
I have a Call Manager 5 system with IP trunks connecting to multiple CME systems. When I try to perform a call transfer (or call hold) on a Call Manager handset there is no response from the system. Handsets on the CME system can perform transfers. F...
I have a client who currently has an old Meridian PBX that has a DASS (G.703) connection to the PSTN with 9 channels. I wish to replace this with a 2821-CCME.Does Cisco support PSTN connectivity with DASS/G.703 using CCME and a VWIC2-1MFT-G703? If so...
I have a CME system and I wish the calling party to have visibility of the dialled extension status. ie. Currently the calling party has no indication (visual or audio) as to whether the extension they are trying to dial is busy or not. Is this possi...
Wanted to see if this problem ever got resolved? I am having a similar issue and have tried to get in touch with TAC but haven't heard anything back as of yet.
Hi There, you need to remove the following line from the config for the crypto ikev2 profile anyconnect profile *** and disable config download on the client. this will then allow the vpn to build correctly
Hi,Apologoes for the delay in replying to this but I did indeed get this resolved a few weeks back.The problem was caused by the Devices not being associated with the ARC "Application User Configuration" in CCM. Once added the BLF fields operated as ...
In which case you should be ok. Its always worth running a port scan (eg. www.bluebitter.de/portscn2.htm) from an external source just to make sure your system is not open.Regards,
