Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I got below error form HP network node managerDuplicate Correlation for STPTopologyChange: STP Topology Change.Do anyone have idea what error this related to?Thanks in advance
we have 4507 as core switch,3560 as edge switch .Edge switches are connected to core switch using ether channel.Following are the data vlans in the networkVlan 301 - 192.168.32.0/24Vlan 302 - 192.168.33.0/24Vlan 303 - 192.168.34.0/24Vlan 304 - 192.16...
Hi all,Is there any issues in creating duplicate ether channel group number in the same network but different switch.For example I have a core switch connecting two buildings which have 3 access layer switchesFirst BuildingSwitch 1 :Ether channel g...
HiI am having Core switch : 4507R-E with IOS 12.2(31)SGA Edge Switch : 4506E with IOS (12.2(52) SGVlansVlan 501 : IPTV (192.168.0.0/19)Vlan 301 : Data (192.168.32.0/24)Vlan 401 : Voice (192.168.64.0/24)Vlan interface in Core switchInterfa...
HiI need all of your help to design a wireless network for a university campus for having internet outside the campus.University need a coverage a boundary of 250 metersaround the campus building.Indoor acess point AIR-LAP-1142N is used with wirle...
Hi Inayath,Below is the only logg i can see in switch at the time of error generated.All are ntp logg's checked stp loop not found anythingMar 1 04:03:25.510: NTP Core (INFO): peer 172.21.203.243 event 'event_reach' (0x84) status 'unreach, conf, ...
Hi,I would suggest you to make better redundancy solution using MHSRPR1 Active gateway for group 2 and R2 standby for group 2 R2 Active gateway for group 3 and R1 standby for group 3.R1interface GigabitEthernet0/0description Inside Interfaceip ad...
