Hi,My Customer uses Cat6509-E with WS-X6724-SFP.This interface sometimes increases "ifOutDiscards" and "qos0Outlost" .Please look at attachments.# This Log is "show interfaces counters int gig x/x"# Count of "ifOutDiscards" and "qos0Outlost" is equal...
Hi All,â HW & SWã»PIX 515-Eã»6.3(5)It sets the following configuration."logging on""logging timestamp""logging console debugging""logging buffered debugging"The output of "show logging" is following.-----pixfirewall(config)# show loggingSyslog lo...
Hi All,ã»Cat2960Gã»IOS 12.2(44)SE1When "snmp-server community private RW" is set," snmp-server user private private v1 " and" snmp-server user private private v2c "is inserted without permission. Is this bug ??Regards,Reiji
Hi,I have a question of processing ACL.Catalyst6500/4948/3750 is processed by Hardware(TCAM) of ACL.Is Cisco 7301 processed by Hardware(ASIC)? or Software(CPU use)??Regards,
Hello everyone,I tested the following compositions.Client ---------- Cisco 1812ããã10.0.0.0/24-----ã»Cisco 1812 config(Excerpt)!!interface FastEthernet0 ip address 10.0.0.1 255.255.255.0 ip access-group 100 in duplex auto speed auto!ip forward-...
Hello,According to the URL of your infomation,---・Loopback errorKeepalives are sent on all interfaces by default in Cisco IOS Software Release 12.1EA-based software.In Cisco IOS Software Release 12.2SE-based software and later, keepalives are not sen...
Hello Giuseppe,Thank you for advice.I will change the timer from 15s(default) to 7s.About 30 SFP interface is up and all interfaces enable udld aggressive.It worries whether there is impact in CPUãafter changing the timer.>Have you seen a CPU aver...