Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Raees, I've got a question regarding the Migration from CUCM 8.6 to 1.0, I went through the below "Ask the Expert" article.https://supportforums.cisco.com/discussion/12103966/ask-expert-cisco-unified-communications-manager-cucm-version-100 My q...
Hi there, I am implementing an auto attendant for one of our clients and they have 8 telephone lines-FXO (4 lines dedicated for the men's dept. and 4 for the ladies dept.)I have created 8 AutoAttendant Scripts with 8 Pilot No.'s matching the 8 teleph...
Hi, I'v configured Auto Attendant on CME (ISR 2911) and the problem I'm facing here is a delay in playing the welcome prompt, so when i call the number 014324928 it reaches my voice-port 0/0/0 which has a connection plar opx immediate to 8080 which m...
Hello,Summary: If i remove the incoming corlist on the ephone-dn 10 the calls go through fine but with the incoming corlist on the ephone-dn 10 i get a busy tone.... also strange if I apply the "Ladies-Access" corlist as the incoming corlist to my Me...
@christopher.green let me know how you go with the below fix. just worked with tac and we fixed it open your cmd (with admin privilege) - and then run the command below and then give it some time - shut the app and try again fixed my issue - all the...
@chr just worked with tac and we fixed it open your cmd (with admin privilege) - and then run the command below and then give it some time - shut the app and try again fixed my issue - all the best netsh winhttp reset proxy basically some proxy info...
