About aprather

aprather · 05-12-2014

I'm having trouble understanding a simple concept.I'm tracking down the path of a route to a destination across a few routers. Running BGP/EIGRP/Static Routes.I look at one of my routers and it tells me that the route is advertised from a router tha...

aprather · 03-26-2013

Telnet has the /source-interface option. I was wondering if there was a way to do this using ssh? I don't see any options for this though.TIA!

aprather · 07-31-2009

Hi all, We started looking at replacing our 3030's today and I got to the point to where we need to import all of our filters and rules from the 3030 into the 5550. I have 2 questions: 1. We checked the cisco site and found a document on conversion b...

aprather · 02-10-2009

Hi all,I have a very odd OSPF issue.I have a 6509 router with a DS3 card doing frame-relay to multiple end sites. These end sites all have 2800 routers.All of my end sites talk OSPF just fine except for one.On the low end 2800 router, this is what I...

aprather · 01-21-2009

Hi all,So a couple of weeks ago I installed 64 bit Vista on all of my computers at the house.I was then asked to do some work from home and when I went to install the VPN client, I realized that 64 bit is not supported.I configured my ASA for Anyconn...

aprather · 05-12-2014

Thanks, I was able to find the exiting interface via the show ipcef command. It shows the physical next hope which is exactly what I was looking for. Thanks!

aprather · 07-31-2009

I may have found something, is this what I would be doing?Enforcing CSD Checks and Applying Policies via DAP This example creates a DAP that checks that a user belongs to two specific AD/LDAP groups (Engineering and Employees) and a specific ASA tunn...

aprather · 02-10-2009

Thanks for the response. I have verified that the provider is not blocking multicast traffic.I have FIXED this issue. I will leave this question out here for a bit longer though to see if someone would like to try and answer the question before I p...

aprather · 01-21-2009

I may have in fact found my issue. I will update as soon as I get to my home or a spot where I can use VPN for testing.Thanks!

aprather · 01-21-2009

Thank you for the replies.I apologize, but I failed to mention that before upgrading to 64 bit Vista, I was able to administer the ASA via ASDM using the old VPN client.So Im pretty sure everything is configured to work correctly through a VPN tunnel...

Member Since	‎11-14-2002 09:41 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	85
Total Helpful Votes Received	3

User Statistics

User Activity

BGP Next Hop Clarification

Can you specify a source interface when using ssh from one router to another?

Converting Filters and Rules from 3030 to ASA 5550

Very Odd OSPF Problem

AnyConnect and Administration

Thanks, I was able to find

Re: Converting Filters and Rules from 3030 to ASA 5550

Re: Very Odd OSPF Problem

Re: AnyConnect and Administration

Re: AnyConnect and Administration