About zildj

zildj · 11-19-2010

I have SIP SRST working but we are still having the following issue:Lack of system message (idle prompt) display on the CISCO 9951 SIP phone in SRST mode using Communications Manager 7.1, phone firmware 9.0(4), and SRST 8.5 IOS.Has anyone had luck di...

zildj · 11-12-2010

I have SIP SRST working and the config has been confirmed good, however we are still having this problem.Lack of system message (idle prompt) display on CISCO 9951 SIP phone in SRST mode on Communications Manager 7.1 using SRST 8.1 IOS.Has anyone h...

zildj · 03-08-2014

When a patch antenna is not an option what would be the aprx max recommended height for a 3602e with short omni dipoles? It appears the new short dipoles have good down tilt specs? Thank you

zildj · 01-19-2012

No option to load unity connection from the disk onto the C200M2 server? Only CUCM and CUCMBE 3000. Trying to get CUCMBE6K and Unity Connection working on the same server. Would this require a new OVA for Unity Connection then when you load the di...

zildj · 01-19-2012

Have one C200M2 server with CUCM 8.6.1a software for the CUCMBE 6K. Will this work for CUCMBE and Unity connection on the same server?What server is required for CUCMBE 5K?Thank you

zildj · 01-19-2012

Thank youIs Unity Connection part of the CUCMBE 6K install like it was for the older CUCMBE versions?

zildj · 01-19-2012

Trying to install BE6K and missing that option. I get CUCM and BE3K as options? Using a C200M2 and the 1000 user BE6K OVA. Should I be getting a BE6K option?Thanks

Member Since	‎10-26-2009 10:52 AM
Date Last Visited	‎10-09-2017 01:43 PM
Posts	12

User Statistics

User Activity

CISCO 9951 SIP Phone SRST system message display

CISCO 9951 SIP Phone SRST system message display

When a patch antenna is not

CUCM 8.6(2) - Missing Business Edition Option

CUCM 8.6(2) - Missing Business Edition Option

CUCM 8.6(2) - Missing Business Edition Option

CUCM 8.6(2) - Missing Business Edition Option