Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We get "recovery on timer expiry" from Cisco IOS debug isdn q931.We have amended the T310 timer according to document 18659 (Call Failure to Long Distance/Mobile Destination).However "recovery on timer expiry" problem persists. We cannot see any diff...
I got the same situation in the past, we just remove the ip address of DANTE SVI. So in your case, on the non querier switch, there will be interface vlan 80 but no ip address .
Not broadcasting SSID is a NOT security practice, actually you have already pointed it outCisco WLC provides a wide range of wireless security policy, for your example here, you may make use of auto contain feature which is under rogue policy to prot...
After the system reset in ROMmon mode is complete, add the Cisco IOS image either through a USB or TFTPReference (page 2):https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-12/configuration_guide/sys_mgmt/b_1612_sys_m...
