Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, We have stumbled upon an issue with the Cisco 2602 Access Points. In the last 3 days APs started to seemingly randomly lose connection to the WLC and are unable to join the Controller again. As of now, about 15 of our 300 APs had the problem. The...
Hi @all!
on a catalyst 2960X with firmware 15.2(2)E4 do not matched the policy-map which is bound to the physical Interface gig 1/0/1. the firmware is a universal image with lanbase license
Who knows the problem and how can it be solved?
class-map ma...
Hi all,i have a gbic problem with my WS-C3560CG-8PC-S.My original 100FX gbics are not workingMar 30 01:28:41.575: %PHY-4-SFP_NOT_SUPPORTED: The SFP in Gi0/10 is not supportedMar 30 01:28:41.575: %PM-4-ERR_DISABLE: gbic-invalid error detected on Gi0/1...
Hello,what exactly do i need to protect my Outdoor Access Points an the Infrastructure behind the AP? The Access Points are mounted on the roof of a building.Is the grounding kit enough? Do i need Lightning arrester? Is there a complete Manual or som...
Hi,after an update from 7.21 to 8.21 on an ASA5510 remote user can still bring up the vpn connection but there is still no connection to the LAN possible. After a downgrade i had to reenter the tunnel-group and the vpn users can still work.Any ideas?...
Firmware Update and restart resolved the issue: I want to give you an update after we could resolve the issue. Sadly, we could not make out a specific cause, but since we first noticed, that the auth list was not wotking on the web GUI we wanted to t...
I dont think it has anything to do with the MICs, since all are active until at least 2024 and all devices I checked get the correct time via NTP. Also, the screenshot from the Traps on the controller do not mention the certificates, but a missing AA...
I will try the update and most likely disable the cert check in advance. It might take some days to organize everything for a worst case scenario. I will get back on this as soon as I have news. As mentioned above, I still dont think it has anything ...
Current airos version is 8.0.133.0 We thought about a firmware update, but also are looking for a maintenance window at the moment. Yes, we only enabled the auth-list for troubleshooting. Before the issue appeared, no entries were in the auth-list. A...
(Cisco Controller) >show auth-list
Authorize MIC APs against Auth-list or AAA ...... enabled
Authorize LSC APs against Auth-List ............. disabled
APs Allowed to Join
AP with Manufacturing Installed Certificate.... yes
AP with Self-Signed C...
