Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have recently deployed Cisco ISE 2.7 in my organization.I have configured EAP-MSchapv2 as inner method and PEAP as outer authentication method.Authenticators are also configured with below configuration. All authenticators are from 3850 model, havi...
ACI Fabric start learning external remote IP’s locally on the Leaf switches . Due to this reason, traffic is locally dropped on Leaf Sw03 instead of going outside the fabric. This issue basically interrupted most of the External & Internal services b...
Hello Experts, @Sergiu.Daniluk ...Please can you assist with this....thanks MSO with 3 APIC's x 2 sites is configured and is working well as the connectivity is between Core to Core, however redundancy is not achieved, I need help to configure an ad...
Dear Community,Need you expert advise on upgrading Cisco ACI APIC from firmware version 4.x to 5.0?? Do you recommend?Its a greenfield deployment and has no workloads, So i think its a best time to upgrade without impacting BU's.Will the smart licens...
Hello Experts,Need your assistance to configure the existence of same VLAN's 900 in 3 different environments eg PROD, NONPROD and MGMT, VLAN 900 exists in all 3 (Its is a brownfield and currently does exists), Now Cisco ACI is introduced (Greenfield)...
Hi Sig Nine,In terms of upgrade we have 6 APICS - 3 in DR and 3 in DC, Do i have to upload the image only in one APIC and it will sync with other remaining 5 APIC's or i have to install one by one in each APIC's.Both clusters are active/active and ha...
Thanks RedNectar,One more help please.....how to migrate SVI's to ACI, can you point to the link or help with the cli commands for the VLAN/SVI migration to ACI, I understand its VLAN = EPG = BD.I did ask for help on this before but i am pointed to d...
