Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have some 10 Gb Transceivers I had connected in some Nexus 7Ks on a VDC for my wireless. This was hooked up to Cisco 8510 controllers and working fine. I have used these transceivers with my new 8540 connections and get this message "ERROR: Etherne...
We have some of the outside access points ready to go and they are the AIR-AP1572EAC-B-K9 models. They are on the same subnet as our 1552’s that we have had up for years. We have a DHCP option 43-1 in CNR for these to find our controllers, but we can...
Weird Issue here: Cisco 8510 on code 8.0.133.0. I have read of at least one other user having this issue a year ago, but no resolution. I have 3702i access points and in some areas, users call in with voice quality issues or other connection issues a...
I have a Cisco 5508 with 3702i-A domain AP's running code version 8.0.140.0 with no problems. I have some -B AP's that appear to join and leave the controller, but will not stay on the controller. I have -B domain AP's on another 8510 running 8.0.133...
When I setup my two 8510 WLC's, I think I may have not allowed static IP's for clients. How can I see on the CLI or GUI if that setting is enabled or disabled? I can't find this anywhere.
So, last week we noticed that 3850 switches with code version 03.07.04E caused issues with CAPWAP traffic passing through it. In short, it don't work. Cisco TAC helped us with this using packet captures. That ended up being the same problem today. Th...
Leo,
You were correct in the MAC filtering. Been a long time since I was on this controller, but the MAC was not added and we used it for AP's on this controller. However, after verifying MAC is added and Option 43-1 is set, I do not see the 1572 jo...
We do not use MAC filtering. I am currently upgrading code on the controller as this code was fairly old. I know there were some known bugs out there that did not allow CAPWAP to work on certain models. I will update in a few.
