Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Folks,I am currently installing a subscriber machine for Unity Connection 8.6.1.Publisher is already up, and subscriber is already configured in the publisher under system -> cluster.At the end of subscriber installation, when Validation Connec...
Hello Folks,I have gone through many topics/discussion on this forum and found out that many users faced this problem before, and the answers to these problems never reached to a solution.I am hit by the same problem. I have a Cisco 6500 which has tw...
Hi All,I have installed MPE 2.1.1 on VMWare as a linux based application.After complete installation, when the CLI appears, I am unable to login into it.During installation of OS, it does not asked me any username/password for this. When I was config...
Hi All,I have installed VIC2-4FXO card on Cisco 2811 at slot 3.Following is the results of output commandscommand "show inventory" revealsNAME: "2nd generation four port FXO voice interface daughtercard on Slot 0 SubSlot 3", DESCR: "2nd generation fo...
In the installation, you cannot enter IP address in the hostname field. there is a seperate entity for IP and Hostnames.In Unity Publisher under System --> Cluster. I have tried entering both IP and Hostnames. but nothing works.
Hello acampbell,All ports are running CDP, and when we connect 7911 or 7970 to the same port, they register instantly.I had a non-Cisco PoE switch which has LLDP-MED instead of CDP.we have configured the same configuration on that switch, and connect...
