Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi EveryoneI'm seeing the following message in my logs every 30 seconds:396901: Apr 2 2014 13:31:20.958 BST: *capwapPingSocketTask: 1 wcm: %CAPWAPPING-3-PKT_RECV_ERROR: capwapPingSocketTask: capwappingRecvPkt returned errorDoes anyone know what thi...
Hi everyoneIs it considered bad practice to configure both a parent interface and its subinterfaces for IP forwarding? I'm talking about back to back routers here, no switches in between.An example:interface GigabitEthernet0/0/0description Parent Int...
HiI've got a bunch of 3750-X switches all running IP Base and acting as a routed access layer. They run OSPF in a totally stubby area with the distribution layer (Nexus 7K) as the ABR. We also have a physically separate management network into which ...
Okay, in case anyone else stumbles across my post, I've fixed it. Turns out to be a known 'interoperability' issue between the ME3x00X series and the ASR9000.Lifted directly from the interoperability guide: 10GE ports on CISCO ME3600X/3800X operatin...
Sorry to resurrect such an old thread, but this is the closest thing I've found to a problem I'm having:I have a GLC-SX-MMD (Cisco branded) in one of the 10G SFP+ ports (te0/1), but the interface never comes up. Weirdly, the other end of the fibre (o...
Thanks for the reply! It's running version 03.02.02.SE, so I'll upgrade and see if it disappears. I won't get a chance to do it until next week, but I'll let you know whether it worked.I'll also check out those links.CheersRich.
