I have 2x c1921( and I only get 15Mbps throughput over IPSec .routers have datak9 and securityk9 licenses. I found notation in datasheet :High performance with integrated services• The Cisco 1900 Series enables deployment in high-speed WAN environmen...
What does "nf" flag mean in NHRPshow ip nhrp:100.0.0.3/32 via 100.0.0.3 Tunnel1 created 00:31:15, expire 01:59:45 Type: dynamic, Flags: router implicit nf <---------------------------------------- NBMA address: 9.0.0.4 (Claimed NBMA address:...
I have problem with DHCP relay on GigabitEthernet0/1/0/0.1200.Access interface was assigned to vrf=LAN and configured DHCP relay. I also tried with DHCP proxy the result was the same.When DHCP clients try to get address the DHCP Offer from server is ...
DHCP pool on server is selected by MAC address.All DHCP pools/clients and server belong to the same vrf.DHCP traffic(DHCP server- user) doesn't pass between two different VRFs.Only MPLS core is in global vrf but it is natural. I don't know why ASR(d...
DHCP pool on server is selected by MAC address.All DHCP pools/clients and server belong to the same vrf.Only MPLS core is in global vrf but it is natural. I don't know why ASR(dhcp relay) replies to echo ICMP from DHCP server but it drops DHCP OFFER...
>dhcp server not reachable in vrf>dhcp server not able to reach the addresscommunication between ASR(relay agent) and DHCP server is bidirectional:RP/0/RSP1/CPU0:G126#ping vrf LAN 10.100.102.4 source 10.119.1.1Wed Oct 29 22:14:58.100 CETType escape s...
I enabled :dhcpd relay all flag is ONdhcpd relay errors flag is ONdhcpd relay events flag is ONdhcpd relay internals flag is ONdhcpd all flag is ONdhcpd errors flag is ONdhcpd events flag is ONdhcpd packet flag is ON I changed DHCP server to 10.100....