I'm experiencing issue with DHCP on Nexus 5K. I have ip dhcp relay address defined on the SVI (Vlan 10). In addition to that I have few another DHCP servers on the same broadcast domain. interface Vlan 10 no shutdown vrf member CUSTA ip address 17...
Hi,Could someone share he SMTPS and IMAPS probe setting configuration in CISCO ACE 4710 for my reference. I have two server 10.1.1.58 and 10.1.1.59 which supposed to be load balaced for the service 993 and 465.RegardsBR
I'm facing some strange problem in brining up the phase 2 between juniper and cisco ASA. Phase 1 is up on running only phase 2 is working at all. Debug also Doesn't gave any more informationSent from Cisco Technical Support iPhone App
Dear Team,One of our CISCO ACE is faulty and now we got the replacement for that. Should I have to raise any request to do license transfer??Please let me knowRegardsBR
Please check the syslog message I'd 113019 for the complete session information of the remote access VPN user. Sent from Cisco Technical Support iPhone App
This command is like show running-config to view configuration of the device. But If you do more system:running-configuration you can view password, L2L tunnel pre-shared key etc.,Hope I explained your questionSent from Cisco Technical Support iPho...
Let me explainYou have side A with network 10.10.10.0/24 which is local LAN in corporate office from which they are trying to initiate remote access VPN to VPN gateway where split tunneling is not enabled in this case apart from local LAN network 10....
