Hi,Please try the following url:http://www.cisco.com/en/US/tech/tk652/tech_topology_and_network_serv_and_protocol_suite_home.htmlThanks,Chinh

Hi,The 827-4V router have 16MB on-board. So to acheive 48 MB DRAM, you will need a 32M DRAM SIMM card install. (16 MB on board DRAM and 32 MB DRAM memory cardhttp://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/800/800upgrd.htm#41897Thanks...

Hi,try the following url:http://www.cisco.com/warp/public/794/804idsl_dhcp_unnum.html http://www.cisco.com/warp/public/794/802804_idsl.html Not sure if these are what you are looking for.Thanks,Chinh

Hi,You can configure a dial-peer with a destination-pattern you want and route itout the FXS voice port.For example, let said one of your PRI DID number is 4081112222 and you would like this number to be dedicated to the fax machine on FXS voice port...

Hi,I'm not sure what configuration setting you have on the vg200.Please check and see if you have configured the following on the vg200:"ccm-manager config server""ccm-manager config"If you have these two commands, you should remove them. These comm...