Buy or Renew
Buy or Renew
marc.groenen
Level 1
Level 1
Member since ‎04-03-2008
‎08-18-2017
Recent Badges
Awards

User Statistics

  • 118 Posts
  • 6 Solutions
  • 60 Helpful votes Given
  • 20 Helpful votes Received
Recent Badges
See all
70 Discussion Posts
60 Replies
40 Discussion Posts
40 Replies
5 Discussion Posts
5 Helpful Vote
50 Discussion Posts
30 Replies
30 Discussion Posts
70 Replies
Certifications
Cisco Certified Design Professional (CCDP)
Cisco Certified Design Associate (CCDA)
Cisco Certified Network Professional Wireless (CCNP Wireless)
Cisco Certified Network Professional Routing and Switching (CCNP Routing and Switching)
Cisco Certified Network Associate Wireless (CCNA Wireless)
Cisco Certified Network Associate Routing and Switching (CCNA Routing and Switching)

User Activity

vWLC v8.2.121 ISE 2.1 and guest portal redirect issue

10-03-2016
Currently working on a flexconnect deploment with serveral vWLC v8.2 and ISE 2.1 nodes. We are having an issue with the HTTP redirect of the guestportal for the guest portal SSID. We have 1 SSID with EAP/TLS working OK with the ISE. The other SSID sh...

1142 AP not joining Virtual WLC

09-09-2016
So im running a virtual WLC with v8.2.121.0 and am currently testing if AP's can join. Since: http://www.cisco.com/c/en/us/support/docs/wireless/virtual-wireless-controller/113677-virtual-wlan-dg-00.html i upgraded the AP to c1140-k9w8-tar.153-3.JD...

Virtual WLC large images installed but small image running

09-06-2016
Ok so i installed a few virtual WLC's with the following image "Cisco_AIR_CTVM_LARGE-K9_8_2_110_0". I can see this image is also running in the VM/cloud environment. But when i logon to the WLC's it says vWLC config: Small and only 200 AP's are suppo...

Convert 3850 to MA

08-01-2016
Ok so i have this setup of a WLC 5760 with about 400 AP's. The edge of the environment is non Cisco so the AP's are currently connected to non Cisco switches. For a proof of concept we implemented Cisco 3850's in 1 building. At first i had the 3850 a...

4402 Upgrade from 6.0.196.0 to 7.0.251.2 H-REAP AP's keep rebooting

04-23-2016
So i had to upgrade a Cisco WLC 4402 which is located in Sweden and has H-REAP AP's connected to it which are located in Norway. Since i have done these kind of upgrade's a few times onsite and it went flawless i thought what would be the problem doi...
View more
Community Statistics
Member Since ‎04-03-2008 07:46 AM
Date Last Visited ‎08-18-2017 03:56 AM
Posts 118
Total Helpful Votes Received 20