Error - Unable to push CLI 'ip domain-lookup' to device 10.10.10.20 using protocol ssh2
I am trying to provision the cat 9300 for the first time in DNAC, it is throwing the error related to ip domain-lookup
Device Model - Cat9300-24UDNA Center ver...
I am from the CMS team and we have a requirement of taking ISE backup for one of our customers. By using the admin user, I am able to execute the backup but when I create a user (without admin role) then it doesn’t show me the commands to create repo...
Hello,I want to modify the threshold values for temperature, voltage etc given in the CIMC of a C240 Series UCS box. In the CIMC window it shows me what is the current value and max/min threshold values but it doesn't give me option to change the thr...
Hi All,What should be the CPU and Memory Utilization percentage that we should call it critical or major issues. like if CPU goes above 80% then we should raise up an alarm and if memory utilization goes above 60% we should have a major alarm.Is ther...
Hi,My question is related to the snmp monitoring for ACI.1. what I understand, earlier ACI didn't supported snmp but with the latest Brahmaputra release does it supports snmp now ?2. Can we monitor the nexus switches individually from any monitoring ...
Hi, Can you please specify the DNAC and ISE version. I hope you have already checked the compatibility matrix. (https://www.cisco.com/c/en/us/solutions/enterprise-networks/software-defined-access/compatibility-matrix.html) I have faced this integrati...
Hi,
This got resolved after the image was downgraded on the Cat9300.
Earlier I installed the latest image - cat9k_iosxe.16.11.01.SPA.bin and this image had bugs which will work with DNAC 1.3 version in the coming release.
As of today, the recomme...
Hi,
Is it possible to capture the AP join issues via snmp OID or any Mib using which I can poll and check the issues APs are facing in joining the WLC. This will help me to understand if the Join issue is due to a general issue or any specific issue...
Hi,
I am want to connect a wireless USB adaptor to a Blade server to provide internet connectivity to my windows VM, hosted on this blade server.
Apart from using the KVM cable, is there any other option available to plugin the adaptor?
Thanks.
