About viveksrivastava

viveksrivastava · 05-17-2012

Hi everyone,We are running a MPLS network consisting 70+ routers of 7600series. P - 7606-S/RSP720/12.2(33)SRD3PE - 7604/SUP32/12.2(33)SDR3I am getting high CPU in one of my P router due to TCP Listener process.xxxx#sh processes cpu sorted | exc 0.00%...

viveksrivastava · 03-01-2012

Hi,I am getting this logs on my core router. Can anyone sugest any resolution??Regards,Vivek

viveksrivastava · 02-29-2012

Hi,I have a cisco 7606-S with dual RSP720-3CXL. Devices reloaded and now none of the RSPs are booting.When I have tried to take the console using only one RSP, card going to rommon mode after that it hangs. I guess its firmware is currupted. Can any ...

viveksrivastava · 12-27-2012

Hi Guys,I was searching for "Wrong TE metric advertisements after ospf/ldp sync". Can some one help me to rectify this problem. Setup -> 1. MPLS network with OSPF using auto-tunnels for TE 2. below is already configuredmpls ldp igp sync...

viveksrivastava · 05-24-2012

Hi Amit,Pls see the below o/p. Requesting for some conclusion ASAP.Regards,Vivek------------------ show version ------------------Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRD3, RELEASE SOFTW...

viveksrivastava · 05-20-2012

Hi Amit,Pls ignore the previous o/p. Correct o/p is given below:AUR_COR#sh stack 70Process 70: TCP Listener Stack segment 0x12E6274C - 0x12E63EBC FP: 0x12E63E78, RA: 0x9478650 FP: 0x12E63EA8, RA: 0x8CA40C0 FP: 0x12E63EB0, RA: 0xA7E8918 FP: 0x0...

viveksrivastava · 05-20-2012

Hi Amit,Pls see the below o/p.BHA_PE1#sh stacks 70Process 70: IPC ISSU Versioning Process Stack segment 0x52C2C9B0 - 0x52C2E120 FP: 0x52C2E060, RA: 0x414B7258 FP: 0x52C2E090, RA: 0x41BAA2B0 FP: 0x52C2E0E8, RA: 0x4146E694 FP: 0x52C2E100, RA: 0x...

viveksrivastava · 04-12-2012

Hi,I got the solution...I have tried with different console cable and PC as well as interchnaged the RSP720 and got rommon access without hange. Then it becom easy to boot the RSP720 with boot command. Further I saw that SP config-reg value is change...

Member Since	‎09-14-2011 01:18 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	10

User Statistics

User Activity

High CPU due to TCP Listener Process

%LSD-4-BADAPI: illegal ip nh 10.134.1.5 for interface GigabitEthernet1/0/6 from TE Lsp Intf

RSP720 Fails, Hanging in "rommon1> " prompt

LDP-IGP Sync

High CPU due to TCP Listener Process

High CPU due to TCP Listener Process

High CPU due to TCP Listener Process

RSP720 Fails, Hanging in "rommon1> " prompt