Yes, this can be done by using AS5350 as CUBE. Please go through the documentation:Make sure below is configured with proper dial-peers. voice service voip allow-connections sip to sipdial-peer voice 100 voipincoming called-number 919.......codec tra...

Hi,You can test your pots dial-peer by using the following command:csim start 97135552121 This number will reflect the pots number and you can turn on the debugs to see if the call goes out. Ofcourse there will be no audio.

Daniel,The ISDN PBX not undestand number format and maybe expecting more digits in this case. Or check the ISDN Plan type with Telco. Make sure you are compatible with Telco plan type for Mobile number. All the digits are being passed to Telco so I s...

Besides that you can also use voice-class codec where you can specify set of codecs to use with more options.. voice class codec 1 codec preference 1 g729r8dial-peer voice 99 voip voice-class codec 1Let me know if you get into any issues.

You can set to false if you don't want the slave to retrieve active config from the Master, then you can set to true on both... This is advisable in production systems. .Hope this helps.