Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I tried to configure WS C6807 XL chassis with the line card WS X6904. Even the data sheet shows backward compatibility,
But CCW will not show such line cards. Hope some one has already experienced this issue and how it overcomes.
Hi,
My Core switch 4507E having its one of vlan gateway is blocked once in a day,But logging did not show any duplicated IP. I need to know whether it happened due to the ip duplication or else any other reason. I found that no IP is resolved to an...
When connecting AIR-CT2504-K9 with AIR-CAP2602E-E-K9 (AP) will prompt following error messages. What could be the issue and how to join the aps to the controller*Mar 1 03:30:09.839: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message...
Hi All Following is my requirement. Two different WAN links get connected to the firewall via two routers.(Different ip subnets).I need to get this two wan streams seperatly to the core switches.Core switches sits Active/Stanby senario.If the Active ...
HI Can anyone tell wheather I can use Interface redundancy concept for 1 nos of ASA to connect 2 nos of core switches(Act/Stanby). I have configured but only one interface of the ASA always active. What can be the issue.Kantha
Hi Guys,01.There are 4 wan links with different subnets ( ADSL,Internet Leased line, Customer 1,Custpmer-2)02. All routers are connected via L2 switch to the firewall 03. The FW has 5 context licences (ASA5520)04. FW is connected to the 2 coreswitche...
