Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everyone,
is there any possibility how to create a report in ISE (1.1.4.218 or 1.4.0.253) where I can display the the "Issuer - Common Name" of the client/user-certificate?
Thank you very much in advance!
Regards,Manuel
hello community,I have a problem using "ip directed-brodcast" to get to my goal... and hopefully you can give me some hints.scenario: distribution-area is: 10.10.128.0 (255.255.128.0)subnetted into different vlans / networks e.g.:VLAN10: 10.10.13...
hi cisco support community,following scenario:LAPs configured on a 5508, 2 different SSIDs on the same LAPssid1: 802.11g onlyssid2: 802.11b/gclientA connects to the LAP with ssid1 an communicates with 54MBit/sclientB comes up and connects to the same...
hey everyone,for some reason our wlan-controllers were build up to be standalone instead of beeing one mobility-group.I would like to change this in order to use all features of HA.let me describe our scenario:two WLCs 5508 running SW ver. 6- same su...
Hello everyone!I have a problem viewing Cisco 4506 switches in CiscoView.- CiscoView V5.5 (build 41, all new packages installed)- WS-C4506 with IOS 12.1(13)EWand- WS-C4506 with IOS Version 12.2(20)EWAswitches aren't displayed correctly in CiscoView:-...
Hello Gagan,
I know that the ISE has all the informations. But I dont see any chance to create a custom report where I can filter for the CN of the client-certificate-issuer.
And this is what I would like to do.
Or to have a column in the live authen...
Hello Gagan,
sorry for replying so late.
I am talking about the Common Name of the issuer of a client-certificate. Like: This client-certificate was issued by CA ??? .
RegardsManuel
it's working! *yeehaw*I'm really happy right now, even if I don't think that it is a good solution, but, first of all, it is working...so now I will clean up that mess and try to do it a little bit more specific!
I will be able to test it in one hour... hopefully it works.but if it works, I am already thinking about access-lists for those ip-helpers.I would like to restrict that traffic to only udp 2000 and not having all dhcp-requests and so on also forwarde...
Right now I am thinking about:ip forward-protocol udp 2000!interface vlan 70 ip helper-address 10.10.139.255 ip helper-address 10.10.149.255!interface vlan 10 & 20 ip directed-broadcast 155!access-list 155 permit udp host 10.10.198.40 any eq 2000 log...
