About phoenix3195

phoenix3195 · 09-05-2013

Hi, I have a problem with Linksys PAP2T ATA:I have call manager express on cisco 2811 (version 7.01) and I configured ephones and ephone-dn as the followings:ephone 2 device-security-mode none mac-address A0BB.6D41.2C01 max-calls-per-button 4 userna...

phoenix3195 · 02-24-2013

Hi Guys, I have a very strange problem:I have hunt group configured on Call Manager express 7.0.1 and the configuration is as the followings:ephone-hunt 3 longest-idle pilot 3001 list 1120,1130, 1141Whenever there is no agent available (not available...

phoenix3195 · 09-06-2013

Hi, I fixed this issue, you are right it was a codec mismatch issue. I added the following under the voice register poolcodec g711ulawThanx

phoenix3195 · 02-24-2013

L-ASA-AC-M-5505L-ASA-AC-E-5505you need both of them, and If you want to add more SSL vpn sessions, use this one:ASA5500-SSL-25I know because I tried it myself .Don't forget to rate if this is the correct answer.

phoenix3195 · 07-06-2012

Hi, Try this:ip nat inside source static [local IP] [Global IP] no-alias.HTHDon't forget to rate useful asnwere.

phoenix3195 · 07-06-2012

Hi, I think you are assigning the policy route on the wrong interface. Try assigning it on the incoming direction. One more thing, with the route-map, you need to add the following:route-map EMAILpermit 20.And leave it empty, it usually won't work wi...

phoenix3195 · 07-06-2012

Hi, Try to lower MTU and adjust TCP mss to a value lower than 1450conf tint di 1ip mtu 1480ip tcp adjust-mss 1420 (or you migh need to have it lower than that, i usually adjust it to 1380)

Member Since	‎05-11-2011 06:12 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	10
Total Helpful Votes Received	3

User Statistics

User Activity

CME with Linksys PAP2T

Hunt group Problems

Re: CME with Linksys PAP2T

Anyconnect for Mobile licensing

Prevent router from responding to a NAT IP address

route-map for two routes

Re: Cisco 887 slow loading web page