Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When we try to install CSMClientSetup on windows 8 - 64 bit it comes up with an error saying Installer User Interface mode not supported The installer cannot run in this UI mode. Toe specify the interface use the -i command-line option followed by ...
Hi,With the firewall services module, Is it possible with the base number of contexts (Admin plus two other) to have these three contexts each with 8 pairs of bridge group interfaces ? Or would it be necessary to order additional context licenses ...
Hi,I'd currently like to upgrade a primary / secondary ACS 5.0.0.21.6 to the latest version 5.2The documentation says to use the recovery CDs for the interim 5.1 and then the 5.2 upgrades. Is this the same as the ISO image you can download from CCO ...
Hi,I have a customer who needs to run 450 to 500 metres over OM3 using a Sup7 SFP+ interface.The SR module only supports up to 300 metres over OM3The LRM is designed for lower distances over lower grade fibre typically 220metresCan we use SFP-10G-LR...
Hi,Please could someone clarify if I want power supply resiliency for the following 4948 model I would need to order a spare PWR-C49E-300AC-R= ?:1 x WS-C4948E-F-E1 x PWR-C49E-300AC-R=Thanks much appreciated.
For information I tried the following from a DOS window with "run as admin"C:\Cisco Docs\Cisco Security Manager>CSMClientSetup.exe -i GUIC:\Cisco Docs\Cisco Security Manager>CSMClientSetup.exe -i ConsoleC:\Cisco Docs\Cisco Security Manager>CSMClientS...
Hi,I have a question related to this, is it possible with the base number of contexts (Admin plus two other) to have three contexts each with 8 pairs of bridge group interfaces ? Or would it be necessary to order additional context licenses ?Thanks...
Hi Antonio,Thanks for your reply. The mention about 1 gig was just to say that I've done this before over 1gig which works fine. So the theory of it working in a similar way over 10gig should hopefully work.This is a 10gig requirement over OM3 500 me...
Hi,I try to poll the oids on our clients' VSS cores but they don't get picked up. Are these not active as part of the IOS code installed and running on the VSS chassis ?e.g. I tried to poll 1.3.6.1.4.1.9.9.388 forMIB CISCO-VIRTUAL-SWITCH-MIBObject ...
