Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, On trunks between some routers and switches, the routers are visible on the switches, but the routers cannot see the switches in CDP. The trunks are otherwise working fine.It looks like the routers only supports cdp v1, so I've tried to disable v...
When sending RME-reports as emails the links to the details uses only the hostname of the CW-server without the domainname. (http://server:1741/blablabla)Does anyone know how to get these links to include the servers domainname?Thanks, Anders
Hi, I'm running LMS 2.5 on Solaris 9, and do have a problem running dcrcli:"<dcrcli> * Warning * DCRCLIFILE Environment variable not set.Authentication Failed. Verify username and password entered"I'v tried this with several user-ids, and from root. ...
Hi, This seems reasonable and I will try this on the routers that are supporting this command.Some routers however are running IOS 12.0.(xx).S which doesn't seem to accept the keyword native.Thanks, Anders
Hi AnkurSorry i didn't answer your last question completely.CDP is enabled on every switch-trunk interface, and CDP is working fine on interswitch-links. The problem seems to be only on the routers. I have no doubt that CDP is enabled, and hope to av...
Thanks for answeringCDP is enabled on all routerinterfaces. The router can see other routers on other interfaces. This also occurs on routers supporting cdp v2.Can there be an issue with CDP and trunking/native-VLAN?-- Anders
