I know, an old version. We hope to be getting a new version soon.I have a specific extension that will not CFA. Others will but not this one. I ran DBLHelper and resynced things. Restarted DBL service. No go.The symptom is, you press the CFA but...
I have a few 7920's purchased used. I cannot get into any configurations as it states "Not Available". I cannot use the Admin keystroke, does not work. The USB interface cannot be enabled so I cannot use the 7920 software. Any other ideas?Thanks!
I initially put this in the wrong area so I will try it here.We have a 3640 router with 3 NM-2V slots. Each slot has 2 FXO-2 cards. After a reload/reboot, the first port in each FXO comes up in shutdown state. I can then do:voice-port 1/0/0shutno shu...
3640 router with 3 NM-2V slots. Each slot has 2 FXO-2 cards. After a reload/reboot, the first port in each FXO comes up in shutdown state. I can then do:voice-port 1/0/0shutno shutand they are both operational. I will then save the configuration....
I changed the CFA CSS for that extension (does all 3 phones) and it worked! I also noticed one phone did not have the same Location as the other 2. I also changed that, but not at the same time.I have since changed the extension back to a CSS of a...