Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
With the 3.x being EOL, does that mean 3.x could be used without cost of buying a license PAK? Or, would I have to purchase the new 4.x PAK in order to increase my anyconnect premium peers? I've seen the old 5.x client still being used out there, j...
Greetings,
I recently implemented a static NAT from an inside address (NLBip) to an outside static public address. The server(s) are working as designed and the site is accessible via HTTP/S externally. There two servers behind the NLB address, th...
Greetings,
Would I just remove the pkg files with a software clean /force command or is there another procedure to remove that package? And will that also remove the extra configuration lines as well?
Thanks
Greetings,
I hoping someone can help clarify this one, I believe I reading this right, but just want to make sure. I've already configured a vPC between two nexus 3845 switches and a keep alive. That is currently working. According to the best pr...
Greetings,
I'm in need of a some advice on setting up a port-channel from a Cisco 3750x to an Avaya switch stack. So far, I've removed the port-channel from both trunk interfaces and left both links as just trunk. I've asked the Avaya engineer to ...
1- Do you try to access the server using the external [public address] or the internal one? [ah-the internal address, both of the addresses (VPN and server address) live on the same ASA]
2- Do you access the server via name or ip address? [ah-Ip addr...
Thanks for posting this Michael, very nice!
I have a similar situation (c881 routers) and was looking to migrate them off the defaultl2l policy. I'll definitely try this sometime this week. Have you tried this on IOS 9.8 with a VTI or heard of any...
Thanks Mark!
I'm new to switch stacking and your post, and the one I found below, helped me understand the caveats setting up switch stacks. This morning I gave it another shot and ended up hard coding slot 1 to the master (priority 15) and just plu...
