Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a somewhat unique situation at a new customer site that I am looking at deploying. First, the basic topology:Core Data Center has an ASA 5510 connecting to the internet, and acting as a site-to-site VPN endpoint.Core Data Center has a 2911 IS...
Hi all,We use a somewhat unique Metro Ethernet WAN, in which all links are 12Mbps, point to point metro ethernet links, but connected between two 2911 ISR G2 routers, rather than switches. These routers are connected to 3750 stacks on the LAN side.W...
Hi all,I am having an issue when implementing an additional internet connection on our ASA 5510. The new connection is "TWCOutside". I was my understanding that static NAT would force our externally hosted servers (Email, PPTP VPN, and FTP) to cont...
I have a situation where we have a single DMZ server currently statically forwarded to a single public IP. TCP ports 80, 443, 8080, 8500, 53, and 21 are open to this server via an access list.However, we have added an additional server to the DMZ, a...
Hi all,I have two routers at our core data center, a 3845 and a 3640. These are configured with GLBP. There are 4 remote sites:Site #1: One T1 link to the 3825Site #2: One T1 link to the 3825, and One T1 link to the 3640Site #3: One T1 link to the ...
I've created a quick Visio diagramming my topology. Hopefully it helps in understanding. The Solid Green line is the new conenction between the 2911 and 851 at the site. The dashed green line shows the two networks that must be able to communicate...
Thank you, I figured it would be a little more involved than Auto QoS.So, given a Cisco Call Manager System, and Cisco 2911 Routers with Metro Ethernet circuits between them, would something similar to the following configuration (done on my lab rout...
jcarvaja or anyone else,Have you had the chance to look over the above config? I am sure I am missing something simple, but I am drawing a blank.Thanks
OK, so I beleive I've truncated this down to what you need in order to give me a hand. Remember that I must configure this using ADSM for screenshot purposes. There is currently a temporary static one-to-one NAT in place for NCAFTP01 until we resol...
