All, I am struggling to find if there if it is possible to present a CLID on an E1 PRI.  My hope if to provide the CLI as close to the customer equipment as possible so there is not need for configuration within the voice core.  I need to provide 1 C...

Hi All, Looking for a bit of assistance with some configuration.  Am i missing or mis-configured something here?  If any other debugging is needed pls let me know.  I ahve attached a ccapi inout debug of a fax transmissionThe issue is that the fax ke...

Hi All,Looking for a bit of assistance in understanding why I continue to get drops on the serial interface although the buffer is not full.  This circuit carries both voice and data and the issue is hissing sound at certain times during voice calls ...

Evening all,Looking for a bit of advice with an issue I am looking into.I have a frame Relay serial link configured for 1.5Mb which is being heavily utilized pretty consistently.  What I am seeing is some up/down entries in the log.  However the timi...

Hi all,Looking for a bit of assistance regarding a CME where by all the phones (3) are rebooting at "Configuring CM List".Hopefully I will provide all that is required but will provide more if needed.##The 3 phones are all 7940's and this was previou...