Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all. I have seven autonomous AP1242AG (c1240-k9w7-tar.124-25d). Can I configure them to a mesh without WLC? AP_r1 -> AP_r2 -> AP_r3 /Root-AP \ AP_l1 -> AP_l2 -> AP_l3 A cisco technician told me that's possible. But I ca...
Hello. How can I forward traffic from LAN 192.168.0.0/24 to 192.168.2.0/24 when the source 192.168.0.20 want to connect to the server 192.168.1.20 but this server is physical in the lan 192.168.2.0/24 and his real IP is 192.168.2.20. The Backbone-Rou...
Hello. I have a critical situation. We use PEAP/MSCHAPv2 for client and user authentication. Wireless users and clients will be authenticated by the ACS by asking a ADS usergroup membership. Valid users and clients have access to LAN ressources prote...
Hi Steve.Thanks for your suggestion. It works. I use the 802.11a for backhaul and 802.11g for client traffic. For this I set the RAP in 802.11a to "Access Point" and all other APs to "Repeater" with a "parent configuration". In 802.11g I set all APs ...
Hello Jon.The 192.168.1.20 is not used in the lan 172.20.1.0.In your example the router have to answer for arp request for the IP 172.20.2.20. Is the default interface setting "ip proxy-arp" enought?Olaf
Hi irisrios. PEAP "Fast Reconect" is disabled on ACS side. But in the meantime we made some tests with cisco ACS and nortel wlan controller. If the wlan client use a wireless profile, generated with the Intel Proset (!! full installation incl. a...
