Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!
I have setup my ipsec VPN like this:
[192.168.100.0./24 ]LAN <<<>>>Gi0/1.1[cisco 1941]Gi0/0.200 <<<>>> WAN (internet)<<<>>>FREEBSD with 3x/32 hosts (A, B, C)
I need to encrypt traffic from 192.168.100.0/24 to hosts A, B and C.
With my existing...
Hello!I'm having trouble setting up port-channel between cisco ASR9K and stack of WS-C3750X-48T-S.It seems to be configured correctly, but interfaces are down. Any ideas?Here is my config:ASR9K:Cisco IOS XR Software, Version 4.2.1[Default]!interface ...
I have tried that as well! But it was the same. I don't see any traffic being sent into this VPN.
sh crypto session remote %.%.40.205 detail
Interface: GigabitEthernet0/0.200Uptime: 00:00:08Session status: UP-ACTIVEPeer: %.%.40.205 port 500 fvrf: (no...
I have same thing on bundle interface. When I do clear interface Bundle-Ether3 same happens.Bundle-Ether3 is up, line protocol is up Interface state transitions: 23 Hardware is Aggregated Ethernet interface(s), address is 6c9c.ed34.6a61 Internet a...
Hello,I got it working! Problem was faulty SFP on 3750 switches. Changed SFP's and config to:ASR9K:Gi0/2/0/12bundle id 4 mode activeGi0/4/0/12bundle id 4 mode active3750XGi1/1/4channel-group 6 mode activeGi2/1/4channel-group 6 mode activeThanks for y...
Hello,I have tried to configure only one interface on bundle, no succsess. So I cleared config on both sides, and configured a simple trunk on boths sides, but it still didn't came up. So now I will go to site, and do L1/L2 troubleshooting.
