About p.blavier

p.blavier · 04-05-2013

Hi all,I have got a very simple lab with 2 publishers configured with a SIP trunk (no cube), so we have :PhoneA->CUCM1->SIP->CUCM2->PhoneBThe trunk is just working fine, I can dial in both directions, however when a phone places a remote phone on ho...

p.blavier · 05-22-2012

Hi all,I m considering building a home lab for studying CCVP, the lab would be based on the follow components :- CUCM 8.X (already installed)- A couple of soft phones running in VMWARE with IP Blue and CIPC (they are already in place and registered w...

p.blavier · 04-10-2013

Sccp for phones on both sides of the trunkSent from Cisco Technical Support iPhone App

p.blavier · 04-08-2013

you right, MTP can makes sense, if the call breaks in media path during "on hold"The thing that confuses me is we cant tell the SIP trunk which Audio Source to use, and as the audio source is "linked" to the holding device (which could be the trunk) ...

p.blavier · 04-08-2013

I have tried to add an MTP on the trunk already, did not makek any differencealso I dont know why an MTP should be involved here ?

p.blavier · 04-06-2013

I do have a mrgl applied to the trunkSent from Cisco Technical Support iPhone App

p.blavier · 04-06-2013

Does that mean we cant have moh when sip trunk are used, i dont believe itSent from Cisco Technical Support iPhone App

Member Since	‎05-22-2012 05:40 AM
Date Last Visited	‎08-01-2018 02:27 AM
Posts	11

User Statistics

User Activity

CUCM 8.0 to CUCM 8.0 SIP trunk MOH issue

VOIP home lab with cisco 2620 and VIC-2FXO port

Re: CUCM 8.0 to CUCM 8.0 SIP trunk MOH issue

CUCM 8.0 to CUCM 8.0 SIP trunk MOH issue

CUCM 8.0 to CUCM 8.0 SIP trunk MOH issue

Re: CUCM 8.0 to CUCM 8.0 SIP trunk MOH issue

Re: CUCM 8.0 to CUCM 8.0 SIP trunk MOH issue