Hi guys,we are using the additional-path install aka BGP PIC feature on IOS on four routers using the following:   address-family vpnv4 bgp additional-paths install   Diagram of topology:   W1 ---- C1 ----- C2 -----W2  |                              ...

  Gday Cisco folks,   we use BGP internally, internal to perimeter Firewalls and on the outside due to running a Public ASN. We only receive two default routes from each ISP and are not running partials or full tables. The end to end routing design w...

Hi guys, I am just investigating the possibility to run BFD on a Cat650X utilizing SUP2Ts running: s2t54-ipservicesk9-mz.SPA.151-2.SY7.bin However, my initial testing shows its not supported, and I would like to ask the greater audience if someone g...

Hi NG, I am currently replacing the combination of an FWSM and ACE-30 out of a Catalyst 6500 chassis with a bunch of F5 AFM/LTM's.Now, by history of the company the current implementation looks similar to this Layer 2 configuration of ACEs.The FWSM a...

Hi guys,I am not sure if I am hitting IOS bug CSCtx61557according to the bug tool this is the info:-----------------------------crash after authc result 'success' from 'dot1x' for client (Unknown MAC)CSCtx61557DescriptionSymptoms: The switch crashes ...