Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have the same DN assigned to 2 different device profiles with which 2 different users (Manager and Assistant) login to 2 different phones using Extension Mobility.
When the Manager DN rings, the Assistant picks up the call.
Then Manager picks up...
I have a physical host that is evenly quad-homed to a pair of 2248PQ Fex's. Each NIC interface is 10Gb.Each of my fex's is single homed to a 5548UP in a VPC configuration. I am using FCoE and I have CNA's in my host. My design is below.On the LAN sid...
Hi,I have an ASA 5505 that was previously using an AAA server for authentication/authorization. This AAA Server is gone. Now, I'd like to log in locally. However, I do not know any local passwords. I used the Cisco guide to reset the password (confre...
Hi,I have remote access VPN set up on my outside interface. External DNS is pointing vpn.contoso.com to this outside interface. I also have a PAT policy for some of my 'Inside' traffic to use this same outside interface IP address.I'd like to be able...
I am designing my fully 10g datacenter access layer with a pair of 5548UP switches in an EvPC and a pair of dual homed 2232PP FEX's. I need to be able to uplink my pair of 5500's up to my pair of 4510R classic aggregation switches. Each 4510R has two...
Thank you all for the replies. My problem is that the ACS server that the ASA was using is no longer available to me (I cut ties with the company that was providing the ACS service).Therefore, I cannot log in to the ASA with any account that has en...
Thank you for the quick reply.The guest network uses public DNS so I'm not sure how that is possible. Is there a way in the ASA to manipulate the DNS response for queries coming from the guest network (other than DNS rewrite)?FYI, I'm using the ASA 5...
I ended up dual home'ing each 4510R to each n5k in a vPC and I let STP block the vPC from one of the 4510R's to the two n5k's. I did this because I needed to keep an active etherchannel between the two 4510R's since they are doing Layer 3 for lots of...
