Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are trying to set up a VPN solution for about 50 remote users to VPN into a PIX 515 with a VPN accelerator card. The only other function for this PIX is our web surfing traffic for about 100 users.The PIX checks a RADIUS server to authenticate us...
Can the 1721 router accept connections from the Cisco 3.5 or higher VPN client? If so, what is the config to do so? I've looked through TAC but the VPDN command set doesn't seem to be what I need. I have the "k9" IOS version loaded which is the IO...
I need help creating static routes for a five remote site network. The goal is that a station in each private network needs to be able to talk to each other remote site but most importantly to 8 specific IP's in the central site. The use of this is ...
All,Sorry for the most basic question here but this situation is this:PIX 501 sitting between the Internet and LAN. This internet connection DOES NOT handle traffic initiated from within the LAN. I simply need to enable the PIX to accept incoming c...
I have a H323 terminal behind a PIX 501 with a static mapping to the terminal. I can access the web interface of the terminal from its outside IP, but I cannot make or receive a Video call. I've enable "fixup protocol H323 1720" and I've even tried...
We had the same issue testing Win2K3 server. I actually downloaded and installed ZoneAlarm Pro, rebooted (it hung my server), booted into safe mode, uninstalled ZoneAlarm and it left the updated the vsdatant.sys file and the VPN worked correctly. I...
The current PIC code 6.2.x and previous support H.323 version 2 with is really for voice over IP applications. Video uses H.323 version 4 (note: these seem like blanket statements but I'm sure this is not true in all cases). The next version of PIX...
I am having similar problems but have found that different versions of the code allow the call to set up or not. Are you using a VoIP application? I'm trying to do video.I could would definitely be interested in what your experience is with the new...
I wanted to see if someone could clarify the statement above. It was my understanding that 6.2.1(x) of the PIX code only supported H323 version 2 and not version 4 which is what most Polycom equipment uses. I had heard though that code base 6.2.2(x...
A quick beginning step is to check your client. Open your client and select "Options" -> "Properties" Let us know if the client is using IPsec of TCP or UDP. Primarily, make sure the "Allow Local LAN Access" box is checked. Hope it's as easy as th...
