Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a situation where we occasionally get a busy signal on IP phones with a shared line even though the phones are on-hook. The shared line is the only one that gets the busy signal. The user can still dial out on the line; they just can't recei...
I have a 2 line phone. The lines have different DNs and different voice-mail. Line 2 is not a primary extension on any other phone. When I press the line button for line 2 and press the CFwdALL softkey, I get a fast busy and a message that says "p...
We are installing approximately 1500 IP phones. We are using 4006 switches ( 7.4(3) ) to provide line power to the phones. The 7940/7960s work fine, but when we attach a 7910 it does not receive power. We can plug a 7940/7960 into the same port and...
I have a situation in which an office assistant has her boss's primary line on her phone as a second line. Someone will call her boss and she will answer the phone. At that point, she either takes a message or transfers the caller to the boss's voi...
Try statically defing the server's mac-address on the switch. For example:mac-address-table static 000b.cd42.c4f5 vlan 20 interface GigabitEthernet1/0/1
Jefferson,Did you get this to work. We have the same Call Manager and IPCC Express versions and are having the same problems. Let me know how you fixed this issue.Thanks.
It is true that you can't use this as standalone in a production environment ( or shouldn't ). If you are using it for a lab environment, just enable failover. The PIX will not be able to establish communication with a fully licensed Pix so it will...
No errors appear anywhere. You just reset the phones and they go back to normal. I have checked ports, call manager sql replication errors, interface errors, etc.. They all appear to be normal. I just know when you move them all to 1 call manager...
