Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When using the DNA feature that if I choose the phone options via DNA and try to locate a Mobility user then this comes back blank it only shows users/ dn`S who are configured on the actual phone such as conference phones - phones which are configu...
I have a couple of questionsIf you have a remote site using SRST with G711 as the local codec connected to the main Cluster across the WANSet up - Only call control, at the moment , is sent across the WAN back to the main Cluster,all PSTN is out loca...
My 5.1 is being blocked I think from accessing the normal SFTP server. Can I download a free SFTP s/w and point it to my P.C instead?- Is so What do I need to do , what s/w is good?- Many thanks
I`m setting up a small lab - I have switch 3550 and a 2600 which I`m going to use for ipt. I want to connect the router to the switch, I can do a sh cdp nei on the router and on the switch and both can see each other but I can not ping from the route...
thanks for your response. That makes sense regarding the local DSP as I pursume the "mixing" is done either in the Cluster if software or Hardware but if calls are not allowed across the conference fails.Do you know a doc which shows how the DSP cal...
I`m happy with that, but the initial annoucement "Welcome to....., press 1 for this , press 2 for that" is across the WAN - Is it not? Only after you selected the options do you go peer to peer with the local extension/ GW?
