02-06-2008 10:53 AM - edited 03-15-2019 08:40 AM
I understand that I need to do the following for mgcp
mgcp
mgcp call-agent ........ service......version 0.1
ccm-manager mgcp
If I want CCM to download everything else I need the following ?
ccm-manager config server x.x.x.x - ip address of ccm
ccm-manager config
If I have FXS port on the GW as well do I need the following
Add the MGCP applicationciation to the Dial Peers for the ports or can I just configure them in CCM ?
Is this correct ?
SRST
I have a bundled SRST from Cisco, how do I know the S/W level of it - sh ver? what do I look for ?
Also If I have SRST with the router do I just need to add the following
ccm-manager fallback-mgcp
.
.
.
.
application
global
service alternative default - for h323 only
02-06-2008 11:21 AM
type in "sh call-manager all" and it will display SRST version at the top.
You would have to define ephone-dn and ephone as minimum to enable SRST after you type ccm-manager fallback-mgcp
02-06-2008 12:51 PM
Do you mean max-phone, max-dn etc?
02-06-2008 12:57 PM
Yep, also following the complete configuration guide.
http://www.cisco.com/univercd/cc/td/doc/product/voice/srst/srst41/srst41sa/index.htm
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide