About gilespapworth

gilespapworth · 02-09-2016

Hi Everyone, This may be a silly question and it may not be. A situation has arrived where by I will need two connections for two different subnets (on a temporary basis). I have a sg300 switch handling VLANS and a RV320 handling the routing for int...

gilespapworth · 08-05-2015

Hi Everyone,I appreciate this is a very beginner question and there may be a few facepalms that will happen but I could do with some help.We have just purchased a SG300-51 switch to enable our business to grow. I am attempting to setup 2 vlans (1 con...

gilespapworth · 02-02-2016

Hi Brandon, Just so that you know (and after a loong time) a RV320 router in bridged mode with the correct static routes works a treat. There is a speed issue I am dealing with but that is something that i can deal with. Thanks all for your help and...

gilespapworth · 10-07-2015

Having just had a chance to work on this, it doesn't seem to make a difference.It does look like the route back on the router is the key issue here.Just for reference, the second vlan is now at 192.168.2.1 with a route to 0.0.0.0 and this is set to r...

gilespapworth · 10-01-2015

Thanks for the response. I will soon be giving this a go so will let you know how it all proceeds.

gilespapworth · 10-01-2015

Hello everyone, Sorry for the lack of update. Another project came up which I had to concentrate on. So now I am back to this.I will certainly try this to see if this works.I will also be needing to buy a router for a new site so will try the other s...

gilespapworth · 08-07-2015

At the moment we are looking at around 25 - 30 users. Large majority of those will be on WiFi just due to portability. A couple of vlans to separate off certain department machines and at least one shared vlan for printers and other common equipment....

Member Since	‎08-05-2015 04:54 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	9

User Statistics

User Activity

VLAN to Different WAN - RV320

SG300-52 Beginner VLAN Config

Hi Brandon,

Having just had a chance to

Thanks for the response. I

Hello everyone, Sorry for the

At the moment we are looking