I wonder if formatting text will be available for the iOS version of Teams.  Even the native formatting option available on iOS after selecting text would be a good start.  ... View more

I am still not clear if the NAS is working normally besides not being able to ping it from the switch? The NAS is plugged into  vlan 104   gi4/1/45   172.16.104.50, right? I am just trying to understand if *the only* problem you have is pinging devices in VLAN 104 from the switch or if there is more to this? ... View more

So everything works normally, you are just not able to ping?  Is that right?  Do you want to share your switch config? (just remove passwords or sensitive data) ... View more

Maybe the NAS blocks ping?  Does it work otherwise?   edit:  Are you pinging from a port on the same or different switch in the stack?   ... View more

You might try: ping ip 172.16.100.50 source 172.16.100.1 (or whatever you vlan interface IP is) ... View more

If it is working I would tend to not mess with it.  That switch is a bit old and EOL so if it breaks.. ... View more

I know this is old, but it case anyone comes back to see it, it appears RV042G can support VLANs just fine: http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/app_notes/RV0xx_an_vlan_78-21017.pdf ... View more

You should be able to make it work with elastix/asterisk.  Just Google elastix spa8000 or asterisk spa8000. ... View more

Meraki MX appliances have dynamic DNS included.  Look at the appliance status page and you will see dynamic DNS name.  What type of other device are you connecting to?  There are some guides at Meraki documentation site. ... View more

Good catch.  Apparent miscategorization by Cisco.  Maybe ATA190 section has bug reports on SPA122 :) ... View more

Yes, you need to update the boot file first.  Actually, you can do both in one session in my experience.  A tftp server is needed to get the boot file loaded and then you can add firmware via web GUI and set the active image to new firmware and reboot.  It will take a while and then you should be good.  I did just download 1.4.2.04 and notice it does not include the boot file so you need to get it from 1.4.1.03 download link. The current boot file is 13506. Nevermind the MIB files and backup your config just in case. Hope that helps. ... View more

I agree, you should ask a specific question and tell us about your issue to see if someone can help.  Besides that you can call Cisco, dig through release notes and forums and sign up for notifications on the product.  I just got one this morning like this: Known Bugs - SPA122 ATA with Router Alert Type: New Bug Id: CSCuz43551 Title: ATA190 - consult transfer no ringback when early-media call established Status: Open Severity: 3 Moderate Description: Symptom: No ringback tone during transfer on ATA190 Conditions: -call flow : ATA190 (SIP) -> CUCM -> IPPhone (SIP) 1 - ATA190 call IPPhone A registered on same CUCM 2 - IPPhone A do a blind transfer to another IPPhone B also registered on CUCM -During Transfer, ATA does not hear ring back tone. Same call flow with caller on IPPhone is OK.(ring back is heard) Workaround: N/A Further Problem Description: *After completing the Blind Transfer, the CUCM disconnect the ATA CI and the MOH CI: 16:16:50.230 |ARBTRY-ConnectionManager- wait_AuDisconnectRequest CI(43518185,43518189),disconnectType(0), IFHandling(1,0)|2,100,63,1.14603583^192.168.137.8^* *However the CUCM stored the ATA CI and did not send any signaling to the ATA, until the voicemail answered the call, so it connected both CIs: 16:17:03.937 |ARBTRY-ConnectionManager-wait_AuConnectRequest(43518185,43518193)|2,100,63,1.14603624^195.25.83.20^* Last Modified: 28-APR-2016 Known Affected Releases: 1.2(1.4) Known Fixed Releases: ... View more

Are you sure they are losing configurations?  Or do you just lose access to them somehow?  If you are not sure you could try connecting via console cable to verify. I also strongly recommend to apply the global command macro auto disabled I have been bit a few times by these switches automagically doing things I didn't want related to macros or auto smartports or some such nonsense. ... View more

Sorry that didn't help, but since you never actually asked a specific question or provided any details about what you are wanting to do, I am not sure what you are expecting here.. So now it sounds like you are asking about DHCP reservations?  What firmware version are you running and are you in layer 3 mode? ... View more

The GUI access to this command is under ip configuration > ARP. ... View more