About daniel.gemmill

daniel.gemmill · 07-12-2017

I have a Cisco SG300-28 switch and upgraded the boot to the latest version 1.3.5.06 but after a reboot the system light keeps blinking. I updated the firmware through several hops to version 1.4.76 (Active) but still the blinking summary light remain...

daniel.gemmill · 05-25-2017

I am have one SG-300 switch with the following setup; Layer 3 IP4 Routing is enabled VLAN 20 192.168.2.100 255.255.255.0 Windows 7 workstation 192.168.2.150 255.255.255.0 Gateway: 192.168.2.100 VLAN 30 169.254.3.100 255.255.255.0 Windows 7 wo...

daniel.gemmill · 07-12-2017

Ugh. Yes, I was on the default and as soon as I changed the IP address the System LED stopped blinking. I was sure it wasn't blinking before I started the upgrades but I was incorrect. Appreciate the help!

daniel.gemmill · 05-30-2017

OK, I believe I have resolved the issue. The issue was directly related to using a 169.254.x.x address, non routable IP range, for the one VLAN. I won't get into the reason why I was using that address range but once I changed it, all inter-VLAN rout...

daniel.gemmill · 05-26-2017

Thanks for responding to my post. The following is the information that you requested; The VLAN 20 workstation does have a default gateway configured. VLAN20 Workstation #ipconfig Ethernet Adapter Local Area Connection: Connection Specific DNS Suff...

Member Since	‎05-25-2017 03:57 PM
Date Last Visited	‎08-18-2017 03:57 AM
Posts	5

User Statistics

User Activity

Cisco SG300-28 switch blinking system light

SG-300 Switch Inter-VLAN routing

Ugh. Yes, I was on the

OK, I believe I have resolved

Thanks for responding to my