07-12-2017 06:13 AM
I have a Cisco SG300-28 switch and upgraded the boot to the latest version 1.3.5.06 but after a reboot the system light keeps blinking.
I updated the firmware through several hops to version 1.4.76 (Active) but still the blinking summary light remains.
I can still access the switch and it seems to be operating normally in my small test environment but would like to remedy the system light.
Any thoughts would be appreciated.
Solved! Go to Solution.
07-12-2017 08:35 AM
Hi
Are you on the default address as that's expected looking through the doc
When the switch is using the factory default IP address, the System LED
flashes continuously
http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/sf30x_sg30x/quick_start/78-19252-01.pdf
07-12-2017 08:35 AM
Hi
Are you on the default address as that's expected looking through the doc
When the switch is using the factory default IP address, the System LED
flashes continuously
http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/sf30x_sg30x/quick_start/78-19252-01.pdf
07-12-2017 08:40 AM
Ugh. Yes, I was on the default and as soon as I changed the IP address the System LED stopped blinking. I was sure it wasn't blinking before I started the upgrades but I was incorrect.
Appreciate the help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide