Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Cisco 7911 model is no more available in the market. Can anyone suggest an equivalent IP phone availablle in the market which works with CUCM 6.1 and above?Thanks & Regards,
Hi,At present we run BGP in our cloud. We are plannning to go for a secondary service provider for WAN failover. They also plan to route traffic using BGP.WHich is the best solution to implement?1.) Terminating the secondary link into the same router...
HI,Our branch office is connected to head office via 2 links from 2 different service provider. Traffic is routed through BGP via 1st service provider and traffic is routed through EIGRP (Tunnel) through 2nd service provider. 1st link is of 512 kb an...
Hi,Can anyone suggest which model is best suitable for the below scenario:We have microsoft servers and other application servers (around 12 in nos) which should have gig connections to the access switch. In turn this access switch will be connected ...
Hi,We are a very small firm and trying to implement a server in our LAN which we wanted to access through internet. We approached ISP for public IP and they installed a router and enabled internet. LAN nodes are able to access internet but cannot acc...
Hi,Right now we have CUCM 6.1 ver and planning to upgrade to ver 9.0 in 6 months of time from now. We need to procure the ip phones to serve the users for next 6 months to work with 6.1 and later move on to the new ver. What is the best option?Thank...
Hi Milan,EBGP Peering is done between router A and branch router. The routing is happening without issues. Link between Router B and branch router is through DIA for which GRE tunnel is configured and passed thorugh EIGRP. When both r configured prim...
